Closed, back open on friday from 8h to 12h and from 13h to 18h - +32 (0)9 355 74 26 - info@welda.be
CubeLaser Nova ACA electronic wire feeder
The wire feeder for the CubeLaser Nova ACA is designed for spools from 5-30 kg to 300 mm with wire diameters from 0.8 to 1.6 mm and can be adjusted to 2.0 or 2.5 mm.
This automated mechanism eliminates costly time and is equipped with a host of features that increase the value of your welders.
Features
- Compact and portable
- Easy access to wire rollers and spools.
- The enclosure of the unit is fully protected to ensure overall operator safety.
- Wire feed speed 15-600 cm/min (adjustable)
- Supports wire diameters of 0.8/1.0/1.21/1.6 mm and can be adjusted to 2.0/2.5 mm
While in operation, the automatic wire feeder has four feed options:
- Continuous mode: A continuous current is supplied to the wire feed unit, resulting in consistent wire delivery. The speed can be manipulated to coincide with the speed of individual welding.
- Pulse mode: This mode alternates between high and low current to reduce spatter and minimize heat input. The pulse rate can be manipulated to coincide with the pulse rate of the weld and reduce excess wire output.
- Manual Wire Feed: After holding down, the wire feeder starts feeding the wire, and the manual wire feed speed depends on the manual feed speed found in the settings.
- Manual Retraction: After holding down, the wire feeder begins to retract, and the manual retraction speed depends on the manual retraction speed found in the settings.
Code CUB FDR019
Barcode W96775